Description

GE  DS200SHVMG1A  thyristor high-voltage M frame interface board

Signal processing parameters
Input signal range: Capable of receiving shunt signals ranging from -500mV to 500mV.
Output signal range: Convert the input signal into a differential frequency signal from 0 to 500kHz and send it to the DCFB or SDCI board as well as the PCCA card.

Hardware configuration parameters
Patch cords: There are 17 configurable patch cords on the board. Through the patch cords, you can choose whether to use a 10:1 current transformer to achieve the attenuation of the AC line current. When the AC line voltage is between 240 and 600V, the attenuator can be bypass. When the voltage is between 601 and 1000V, an attenuator should be used.
Connectors: It includes various plug connectors and pin connectors, such as CT1PL, CT3PL, DC1PL and other plug connectors, as well as L1-L3, M1A, M1B and other pin connectors.
Protection components: It integrates standard voltage-limiting hardware components such as capacitors, diodes and rectifiers, etc. Meanwhile, the PCB has a common protective coating, and insulating rings are also installed on the mounting holes to provide additional voltage protection.

Product specification parameters
Manufacturer: General Electric (GE).
Product series: Mark V
Component Number: DS200SHVMG1A.
Product type: Thyristor high-voltage M-frame interface board.