Description

GE  VME-5565  reflective memory VME node card

Memory: It is usually configurable to 128 megabytes, and some data indicate that there are also configuration options of 64 megabytes or 256 megabytes.
Transmission specification:
Non-redundant transmission rate: 43MByte/s (single long word access) to 170MByte/s (64-byte burst).
Redundant transmission rate: 20MByte/s (single long word access) to 87MByte/s (64-byte burst).

PCI transmission rate
At 33MHz/ 32-bit bus, it is 132 megabytes per second.
It is 264 megabytes per second when operating at 33MHz/ 64-bit bus or 66MHz/ 32-bit bus.
At 66MHz/ 64-bit bus, it is 528MByte/s and limits the available link back.
PCI Express transmission rate: 4 channels at 2.5Gbit/s.

Environmental Regulations
Operating temperature: 0°C to + 65°C, forced air cooling.
Storage temperature: -40°C to + 85°C.
Relative humidity: 20% to 80%, no condensation.
Power requirement: The typical value is 0.7A, and the maximum value is 1.5A at + 3.3VDC (±5%). 0.7A, typically 1.8A (±5%) at +5VDC.

Other parameters:
The serial connection speed can reach up to 2.12Gbaud.
Supports dynamic data packet size, ranging from 4 to 64 bytes.
The network data transmission rate can reach up to 170MByte/s.
The delay between nodes is only 450 to 500 nanoseconds, with a deterministic transmission rate.
Supports up to 256 independent systems (nodes).
Multimode optical fibers support up to 300 meters, while single-mode optical fibers support up to 10 kilometers.

With its characteristics of high speed, low latency and high reliability, VME-5565 is widely used in fields such as industrial control, aerospace, military and medical care, and can meet the strict requirements of these fields for real-time data sharing and processing.