Description

GE  IC693ACC315  Analog output module

Function and application: It is typically used to achieve modulation control of instruments or equipment, such as variable frequency drives (VFDS), control valves, positioners, converters, and other similar modulation devices. It can also be used to retransmit analog data to receiving components, such as recorders, data loggers and other compatible receiving devices.

Performance parameters:
Calibration information: After factory calibration, the calibration information includes 0.625μA from 0 to 20mA. It is 0.5μA at 4 to 20mA. The voltage is 0.3125mV (per count).
Update rate and resolution: The update rate of each channel of the module is 8 milliseconds, and the resolution is 0.5μA (1LSB = 0.5μA), suitable for 4-20 mA. It is 0.625μA at 0-20mA (1LSB = 0.625μA); The output signal from 0 to 10VDC is 0.3125mV (1LSB = 0.3125mV), and the output signal from -10 to + 10VDC is also 0.3125mV (1LSB = 0.3125mV).

Number of channels: Usually 4 or 8 channels (depending on the model), each channel can independently configure the output signal type (current/voltage) and range, supporting flexible multi-device synchronous control.
Isolation features: Electrical isolation (such as optocoupler isolation) is available between channels to prevent interference between channels and enhance system stability. It is particularly suitable for multi-load or complex electromagnetic environments.

Status monitoring
It is equipped with an LED indicator light to display the power status of the module, channel faults (such as overload and short circuit), and communication status in real time, facilitating quick problem location.
It supports self-diagnostic function, and the module fault code can be read through the PLC system software to achieve preventive maintenance (such as detecting insufficient battery power, memory errors, etc.).
Calibration and Configuration
It has been precisely calibrated before leaving the factory and supports user-defined calibration (through software or hardware adjustment) to ensure the stability of accuracy during long-term use.
Channel parameters can be flexibly configured through PLC programming software (such as Proficy Machine Edition) without the need for additional hardware tools.

Adaptation platform: Specifically designed for GE Fanuc 90-30 series PLCS, it can be directly installed in the PLC rack, communicate with the CPU through the backplane bus, and supports hot plugging (for some models).
Protocol and Communication: Seamlessly integrated into the PLC control system, supporting the proprietary communication protocols of GE Fanuc (such as the Series 90 communication protocol), and transmitting output data and status information in real time.