Description

Emerson  1C31124G01  Analog output module

Technical parameters

There are 8 independent analog output channels, which can simultaneously control multiple devices
Signal type – Current Output: 4-20mA, 0-20mA, ±20mA
– Voltage output: 0-10V, ±10V (configurable)
The output accuracy is ±0.1% FS (full scale), and the high precision ensures the control accuracy
With a resolution of 16 bits, it provides fine signal adjustment capabilities
The typical update rate is 10ms per channel, providing a rapid response to control instructions
The isolation between the electrical isolation channels and between the output and the system is ≥500Vrms, with strong anti-interference ability
Fault protection supports output holding (Fail-safe) or preset safety values to ensure the safety of the equipment in case of faults
Working voltage: 24VDC (±10%), supports redundant power supply (optional)
Power consumption ≤10W, low-power design
Operating temperature: -40°C to +70°C, suitable for harsh industrial environments
Installation method: DIN rail installation, supports hot plugging (replace while powered on)

Application scenarios
Electric power industry
Steam turbine speed control
Boiler combustion regulation (air volume and fuel volume control)
Water level regulation system
Chemical Engineering and Petrochemicals
Closed-loop control of flow, pressure and temperature
Material proportioning control in chemical reactors
Regulating valve, inverter drive
Other industrial fields:
Speed control of rolling mills in the metallurgical industry
Tension control in the papermaking industry
Dosing control of water treatment systems