Description

Emerson  5X00058G01  HART analog input card

Input characteristics
Input range: 4-20mA current signal, also supports voltage signals such as 0-5V, -20mA-20mA, 0V-10V, etc.
Accuracy: ±0.15% full scale.
Resolution: 0.001% full scale.
Response time: less than 250ms.
Communication protocol: Supports HART protocol, facilitating configuration and diagnostic communication with on-site devices.
Power supply requirement: 24VDC.
Power consumption: Maximum 5W.
Working environment
Temperature: -40℃ to + 70℃ or -40℃ to + 85℃.
Humidity: 0 to 95%, no condensation.

Applied to the following scenarios:
Power industry: It is used for thermal automation control in power plants, such as monitoring analog signals like temperature, pressure and flow of generator sets, as well as collecting operating parameters of equipment like steam turbines and boilers, to provide accurate data for the control system, so as to achieve precise control and optimization of the power generation process and ensure the stability and efficiency of power production.
Petrochemical industry: In the processes of petroleum refining and chemical production, various process parameters can be collected, such as the temperature, pressure, and liquid level of the reaction vessel, as well as the flow rate and composition of the fluid in the pipeline and other analog signals. Through the precise measurement and processing of these signals, the automatic control of the chemical production process is achieved, ensuring the safety, stability of the production process and the consistency of product quality.

Water treatment industry: It is used to monitor analog signals such as water level, water pressure and water quality during the water treatment process, to achieve automatic control of equipment such as water pumps and valves, ensure the normal operation of water treatment systems, and improve the utilization efficiency of water resources and water quality.