Description

MOTOROLA  MVME162-222  industrial control card

Electrical parameters: The rated voltage is 120 volts AC, and the output voltage range is 85 to 132 volts AC. Each module has 12 50/60Hz outputs and can be divided into two groups, with six outputs in each group.
Isolation characteristics: The grounding from the field to the backplane (optical) and the frame is continuous at 250VAC, and 1500VAC lasts for 1 minute. Group to group consists of two continuous 50VAC and 1500VAC for one minute.

Output current: The maximum output current at each point is 0.5 amperes. At 60°C, the maximum output current per group is 1 ampere; at 50°C, the maximum output current per group is 2 amperes. The maximum load current depends on the ambient temperature. In addition, the maximum inrush current for one cycle is 5 amperes, and the minimum load current is 50mA.
Voltage drop and leakage current: The maximum output voltage drop is 1.5 volts, and the maximum output leakage current is 3mA at 120 volts AC.

Response time: The maximum connection response time is 1ms, and the maximum shutdown response time is 1/2 cycle.
Power consumption: When all outputs are connected, the power consumption is 210mA, and the power supply comes from the 5-volt bus on the backplane.
Fuse: Equipped with 2 3-ampere fuses, the GE Fanuc part number is 44A724627-111.
Software function: The device can be connected using set points and set point files. The software can communicate directly with relays in online mode (relay connection), and communication relays can be prepared and grouped according to communication interfaces and stations.