Description

ICS TRIPLEX T9110 Trusted processor module

The technical parameters are as follows:
Power supply parameters: The system power supply voltage range is 20 to 32V DC.
Output parameters: It has 40 channels, with 5 channels for each of the 8 output channels. The working output/field voltage range is 18 to 32V dc, the measurement range is 0 to 32V DC, and the maximum tolerance is -1 to 40V DC. The rated output current (continuous) is 2A for each channel of each power supply group, limited to 8A.
Electrical characteristics: Inter-channel crosstalk is greater than -40 dB. The power consumption of the on-site power supply (1A per channel) is 24W, and the power consumption of the system power supply (24V) is also 24W. The continuous working voltage of the on-site public isolation is 250 volts of direct current, and the maximum withstand voltage is 2.5 kilovolts of direct current.
Signal transmission: The output on/off delay is 0.5 milliseconds, the sample update time is 0.5 milliseconds, the event resolution is 1 millisecond, and the self-check interval is 2 minutes.
Working environment: Operating temperature range: -5 ℃ to 60℃, non-operating temperature range: -25 ℃ to 70℃, temperature change rate: 0.5℃ per minute, operating humidity: 5-95%RH, non-condensing.
Physical parameters: Dimensions are 30 cm x cm x24.1 cm, weight is 1.13 kg, and transportation weight is 3 kg.
Safety Certification: IEC 61508 SIL 3 certified by twin v

Performance characteristics
High-performance processing: Equipped with high-performance processors, it can quickly and accurately process various industrial control algorithms and real-time data, support multi-task parallel processing, ensure the real-time response of industrial automation systems, and meet the complex industrial application requirements.
Strong scalability: Supports various expansion cards and peripherals. Users can customize and expand them according to their actual needs, enhancing the flexibility and maintainability of the system.

High reliability design: Supports fault-tolerant processing, equipped with redundant memory, dual-core processor, etc., adopts IP67 protection level and robust design, which can operate stably in harsh industrial environments. Even in case of failure, it can ensure the normal operation of the system.
High resolution: It can provide an absolute position with up to 14-bit resolution, which is very useful for precision control applications.
Multiple output interfaces: Supports multiple output interfaces such as RS-485, RS-232 and CAN bus, and is compatible with various controllers and other devices, facilitating data transmission and system integration.
Easy to use: The module is easy to install and offers a variety of software and hardware support, facilitating system integration and maintenance for users.