Description

GE  DS200RTBAG5A  Mark V Series relay terminal board

Basic information
Component Number: DS200RTBAG5A.
Product series: Mark V
Product type: Relay terminal board.
Manufacturer: General Electric (GE).

Hardware structure
Relay configuration: There are usually ten relays on the board, marked as K20 to K29. Among them, H20 to K26 are DPDT type relays, and the rest are 4PDT type relays. Each relay is equipped with a status indicator light for convenient diagnostic testing. When the relay is powered on, the LED lights up.
Connectors: It includes a 16-pin connector and a 2-pin connector. Through the connectors, the relay can be connected to the external circuit to achieve signal input and output.
Installation method: It can be installed in the Mark V series drive cabinet. Generally, it is fixed on the bracket through four screws and washers. The bracket separates the board card from the metal surface of the cabinet body to prevent contact short circuit.

Functional characteristics
Signal isolation and conversion: Isolate the weak current signals of the control system from the strong current signals of external devices to protect the control system from interference and damage. At the same time, achieve signal conversion and amplification to drive external relays, contactors and other devices.
Flexible configuration: The power source and action logic of the relay can be configured through hardware patch cords to adapt to different application scenarios and control requirements.
Status monitoring: The status indicator light of each relay can provide real-time feedback on the working status of the relay, facilitating on-site monitoring and troubleshooting by operators.

Application field
Power industry: Control and protection systems for turbines, achieving excitation control of generators, opening and closing control of circuit breakers, etc.
Industrial automation: In the control systems of various industrial equipment, it can be used as a digital output module to control the operation of devices such as motors, valves, and indicator lights.
Petroleum and natural gas: In the petrochemical production process, it is used to control the start and stop of equipment such as compressors, pumps, and valves, as well as to monitor their operational status.