The PCD232A is a dedicated serial communication interface module for ABB 800xA and Advant OCS control systems, equipped with dual independent DB9 serial ports supporting RS-232 and RS-485 dual protocols. It delivers a maximum baud rate of 115.2 kbps for low-latency cross-device data transmission, with typical power consumption below 2.5mA under 24V DC system power supply. Rated for an operating temperature range of -20°C to +70°C and 5%-95% non-condensing humidity, it adapts to harsh indoor cabinet environments. Measuring 86mm × 51mm × 27mm with a net weight of 10g, it adopts compact plug-in rack installation. It supports hot swapping and real-time LED communication status indication, features industrial EMC anti-interference performance, and connects third-party instruments, flow meters and auxiliary PLCs to expand peripheral serial communication capacity for main controllers.
"/>

BB PCD232A Serial Communication Interface Module, Part No. 3BHE022293R0101

BB PCD232A Serial Communication Interface Module, Part No. 3BHE022293R0101

The PCD232A is a dedicated serial communication interface module for ABB 800xA and Advant OCS control systems, equipped with dual independent DB9 serial ports supporting RS-232 and RS-485 dual protocols. It delivers a maximum baud rate of 115.2 kbps for low-latency cross-device data transmission, with typical power consumption below 2.5mA under 24V DC system power supply. Rated for an operating temperature range of -20°C to +70°C and 5%-95% non-condensing humidity, it adapts to harsh indoor cabinet environments. Measuring 86mm × 51mm × 27mm with a net weight of 10g, it adopts compact plug-in rack installation. It supports hot swapping and real-time LED communication status indication, features industrial EMC anti-interference performance, and connects third-party instruments, flow meters and auxiliary PLCs to expand peripheral serial communication capacity for main controllers.

Description

PCD232A (3BHE022293R0101) is a lightweight plug-in serial expansion module developed for ABB 800PEC and 800xA distributed control platforms, used to make up for the insufficient native serial interfaces of main control boards. Unlike fieldbus communication cards such as CI854BK01, it focuses on traditional serial point-to-point communication, widely used for accessing legacy industrial peripheral devices without Ethernet or PROFIBUS interfaces. Its dual DB9 ports support independent protocol configuration, allowing one port for RS-232 short-distance device connection within 15m and the other for RS-485 long-distance transmission up to 1200m, eliminating the need for external protocol converters on site.
Embedded with dedicated serial error correction chips, the module supports parity check, stop bit customization and frame retransmission, effectively resisting signal distortion caused by inverter electromagnetic interference. In terms of electrical parameters, it supports wide-range rack backplane power input of 18-30V DC, with overvoltage and reverse connection protection circuits built in to avoid burnout from on-site power fluctuation. The environmental rating covers storage temperature from -40°C to +85°C, meeting long-term standby transportation requirements for industrial spare parts. Its ultra-compact size enables dense deployment in limited rack slots without occupying redundant wiring space.
It supports online hot swapping without rebooting the main control system, which ensures uninterrupted serial data collection during module replacement. Two front-panel LEDs separately indicate port transceiver status and link faults for rapid troubleshooting. Compliant with CE industrial electromagnetic compatibility standards, it can operate stably alongside high-power drive equipment in water treatment, thermal power and fine chemical industries. It is compatible with all mainstream 800xA controller backplanes, and multiple modules can be stacked in a single rack to realize multi-group isolated serial communication channels, improving system peripheral access scalability and operational maintainability.

Reviews

There are no reviews yet.

Be the first to review “BB PCD232A Serial Communication Interface Module, Part No. 3BHE022293R0101”

Your email address will not be published. Required fields are marked *